Reviving

The Bronze Treatment is an effective way of keeping floors beautiful, bringing dull wooden floors back to life in a jiffy.

Reviving

The Bronze Treatment is an effective way of keeping floors beautiful, bringing dull wooden floors back to life in a jiffy.

With the Bona PowerScrubber and the specially-formulated Bona Deep Clean Solution, a wooden surface is deeply cleaned, so that even the toughest dirt, grime and scuff marks are removed. The floor is then ready for a fresh layer of polish, maintenance oil or wax oil, depending on the type of coating. The floor will look next-to new within just a few hours.

Lacquered floors

Revitalise your floor - it will look almost like new, within just a few hours.

Step 1 - Preparation

Remove furniture from the area, and use a Bona Dusting Pad or a vacuum cleaner to remove dust and debris.

Closeup of a man’s hands attaching white brushes to a Bona Power-Scrubber machine.

Step 2 - Mounting brushes

Attach the white brushes to the underside of the Bona PowerScrubber. It's easy.

A flooring contractor uses a Bona Power Scrubber to clean a wood floor. There is a clear difference in the cleaned area.

Step 3 - Deep-cleaning

Clean the surface thoroughly using the Bona PowerScrubber with Bona Deep Clean Solution diluted in the tank (with a ratio of 1:10). Gently move the machine systematically, slightly overlapping with each pass (by about 20 cm). Ensure that there's are no excess liquid on the floor, and let it dry. Place the Bona PowerScrubber on a water-resistant surface.

Step 4 - Polish application

Apply a thin, even coat of Bona Polish to the floor using a Bona Applicator Pad. Where possible, apply it following the direction of the grain. Allow at least an hour drying time before resuming light use of the floor. If necessary, a second layer of Bona Polish can be applied two hours after the first. Please note: If the floor has had a previous polish treatment, or has a large build-up of polish, it may be necessary to remove the old layer.

Oiled floors

A Bronze Treatment is quick and effective - and it will transform your floor beautifully.

Step 1 - Preparation

Remove furniture from the area, and use a Bona Dusting Pad or a vacuum cleaner to remove dust and debris.

Step 2 - Mounting brushes

Attach the red brushes to the underside of the Bona PowerScrubber.

Step 3 - Deep-cleaning

Clean the surface thoroughly using the Bona PowerScrubber with Bona Deep Clean Solution diluted in the tank (with a ratio of 1:10). Gently move the machine systematically, slightly overlapping each pass (by about 20 cm). Ensure that there's no excess liquid on the floor, and let it dry. Place Bona PowerScrubber on water-resistant surface.

Step 4 - Oil Care Application

Pour Bona Oil Care (40-60 m2/lit) onto the floor and distribute using a Bona Wool Pad attached to the Bona FlexiSand. Add more oil as required. Manually apply oil to edges and corners, areas the FlexiSand can't reach. For best result, buff the floor a final time using a clean and dry Bona Wool Pad. Allow floor to dry 12 hours prior to use.

Hard-wax oiled floors

Bring dull wooden floors back to life - quickly and easily.

Step 1 - Preparation

Remove furniture from the area, and use a Bona Dusting Pad or a vacuum cleaner to remove dust and debris.

Step 2 - Mounting brushes

Attach the red brushes to the underside of the Bona PowerScrubber.

Step 3 - Deep-cleaning

Clean the surface thoroughly using the Bona PowerScrubber with Bona Deep Clean Solution diluted in the tank (with a ratio of 1:10). Gently move the machine systematically, slightly overlapping each pass (about 20 cm). Ensure that there's no excess liquid on the floor, and let it dry. Place the Bona PowerScrubber on a water-resistant surface.

Step 4 - Bona Wax Oil W application

Pour Bona Wax Oil W (50-80 m2/lit) onto the floor, and distribute it evenly, using the Bona FlexiSand, with a Bona Wool Pad attached. Add more oil as required. Manually apply oil to edges and corners, and other areas that the FlexiSand can't reach. For the best results, buff the floor one last time, using a dry, clean Bona Wool Pad. Allow the floor to dry for at least 12 hours before allowing traffic to resume.