logo
Bona Clean R50 5L
EM701020001

Bona Clean R50

Size: 5 L

  • Key benefits

    • Gentle yet effective
    • Highly concentrated
    • Low-foaming
    • Removes soiling

    Information

    Highly concentrated, slightly alkaline cleaning agent for resilient floor coverings on base of PVC, rubber or linoleum.

    Bona Clean R50 is particularly suited for the routine cleaning of resilient flooring treated with products from the Bona Resilient System. It may be used for daily cleaning, as well as to remove severe soiling. Bona Clean R50 is also suitable for use in automatic cleaning systems.

  • TDS - Bona Clean R50

    SDS - Bona Clean R50

  • Technical data

    Find key technical specifications, application conditions and product information for this product. Select your preferred language to view the available translations.

    Change language if needed.
    TDS Tech Application Tools
    Bona Microfiber Cleaning Pad, Bona Buffer or FlexiSand with Bona red Pad or Bona PowerScrubber (white or red brushes)
    TDS Tech Dilution
    Normal cleaning, 50ml to 10 litres (1:200) (see below for alternatives)
    TDS Tech Disposal
    Waste and emptied containers should be handled in accordance with local regulations.
    TDS Tech Pack Size
    3 x 5 litres
    TDS Tech PH Value
    approx. 9 (concentrate)
    TDS Tech Product Base Type
    Surfactant solution
    TDS Tech SDS Notice
    Additional detailed information is noted in the appropriate Safety Data Sheet.
    TDS Tech Shelf Life
    2 years from date of production, in unopened original container
    TDS Tech Storage Transport
    The temperature must not fall below +5°C or exceed +30°C during storage and transport

  • Instructions

    Follow these recommendations to achieve the best application results for Bona Clean R50.

    TDS Application Notes

    Routine Maintenance 1. Dry clean first with a Bona Microfiber Dusting pad or a vacuum cleaner to remove all loose dirt. 2. Dilute Bona Clean R50, 50 ml to 10 litres cold water for routine cleaning, wipe the floor with the solution and let the surface dry sufficiently before resuming traffic. For heavy contamination, dilute 250 ml to 10 litres cold water. Note: Whenever a concentration greater than 150 ml to 10 litres water is used, it is then necessary to neutralise afterwards by rinsing the entire floor with clean water. Large areas 1. For large areas Bona Clean R50 is also suitable for use in an auto scrubber such as a Bona PowerScrubber with a dilution of 50 ml to 10 litres (1:200) cold water.

    TDS Consumption

    Routine maintenance 1 litre = 1000 m²

    TDS General Disclaimer

    The information in this document and all other advice and recommendations that we provide to help and assist the applicator are based on previous experience and extensive testing but makes no claim to be complete. Because of the wide range of possible uses and conditions of application of our products, we do not relieve users from the need to carry out their own trials or to seek technical advice from Bona before use. Bona can only guarantee its products and not the construction as a whole. Observe recommendations from flooring manufacturer and the provisions of relevant standards.

    TDS Main USP

    RESILIENT FLOOR MAINTENANCE

    TDS Sub Header

    Daily cleaning of resilient flooring