TDS Application Notes
1) Shake the lacquer can vigorously for 30 seconds before use or before decanting smaller quantities. 2) Apply using a Bona Roller at 8–10 m²/L (≈100–120 g/m²). Roll alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. 3) Allow to dry properly before applying further layers. Ensure proper ventilation. 4) If necessary, make an intermediate sanding using the Bona Scrad System P150 grit (or finer) and remove dust before applying a final layer of lacquer. Note: If the previous layer of lacquer/primer has been allowed more than 24 hours drying time then an intermediate sanding is always required. After the final application, the surface can support light foot traffic after 8 hours and can be put into full use after 24 hours. Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings. Also avoid placing heavy objects or damp mopping the floor during this time. Note: If Bona Traffic GO has been combined with Bona Craft Oil 2K then the surface must be allowed to cure for 1 week before the surface is covered.
