TDS Application Notes
1) Shake the lacquer can and add 8% Bona SuperSport HD Hardener. Immediately proceed to shake the mixture thoroughly for one minute. Use the mixture within 3 hours. 2) Apply using a Bona Roller at 8-10m²/litre (100-120g/m²). Roll alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. 3) Allow to dry properly before applying further layers of lacquer or paint. Anticipate slightly longer drying time for each layer that is applied. Always ensure good ventilation during the drying process. If necessary, make an intermediate sanding using Bona Abrasives P150 grit (or finer) and remove dust before applying a layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required. For paint, the limit is 12 hours. The curing process takes approximately three days, (90% cured in 24 hours, 100% after 72 hours). Do not cover the surface until the floor has fully cured. The floor may be played on after 24 hours but remains susceptible to scuffing or marring until completely cured. During the first week, no wet cleaning, only dry dusting.