logo
Bona Titan 15kg
BRTIT02800M1BO

Bona Titan

Dimension: -
Size: 15 kg

  • Key benefits

    • Light traffic possible in 4 hours
    • Ideal for oversized planks
    • Rapid strength build-up
    A+
    DIBt
    EC1 Plus
    GREENGUARD Gold
    EPD

    Information

    Strongest bonding in less time!

    The new improved formula of Bona Titan takes wood floor adhesives to a new level. With unbeatable bonding strength, crosslinking speed, and prolonged open time, the unique silane adhesive, Bona Titan, has been upgraded to outstanding performance. Titan produces strong, stable ribs, greatly reducing the risk of hollow spots. It is fast-curing and requires no primer when applied under normal sub-floor conditions. Titan is simply the most effective, economical and convenient solution for all wood floor installations.

  • TDS - Bona Titan

    SDS - Bona Titan

    EPD - Bona Titan

    Sustainability Data Sheet - Bona Titan

    Emicode EC 1PLUS - Bona Titan (EN)

    GREENGUARD Gold Certificate - Bona Titan

    Sales sheet - Bona Titan

    Sales brochure - Bona Titan

    DIBt certificate for Bona Titan

  • Technical data

    Find key technical specifications, application conditions and product information for this product. Select your preferred language to view the available translations.

    Change language if needed.
    TDS Tech Certificates
    EMICODE: EC 1PLUS French VOC: A+ DIBt: Z-155.10-482
    TDS Tech Cleaning
    Bona Cleaning Wipes, acetone. Hardened adhesive can only be removed mechanically.
    TDS Tech Colours
    Oak tone
    TDS Tech Curing Time Until
    Light foot traffic after approx. 4–6 hrs.* Full cure 12–24 hrs* Application of surface treatments should only proceed after full cure. *at 20 °C and 55 % RH.
    TDS Tech DIN 17178
    Hard
    TDS Tech Disposal
    Waste and emptied containers should be handled in accordance with local regulations.
    TDS Tech GISCODE
    RS10
    TDS Tech Open Time
    approx. 40 mins*
    TDS Tech Pack Size
    15 kg buckets.
    TDS Tech Product Base Type
    Silane modified prepolymer
    TDS Tech SDS Notice
    Additional detailed information is noted in the appropriate Safety Data Sheet.
    TDS Tech Shelf Life
    12 months from date of production in unopened original bucket.
    TDS Tech Storage Transport
    The temperature must not fall below +5 °C or exceed +25 °C during storage and transport. Store in a dry, well ventilated place. Protect from freezing.
    TDS Tech Viscosity
    High viscosity

  • Instructions

    Follow these recommendations to achieve the best application results for Bona Titan.

    TDS Application

    Cementitious screed (CT) according to EN 13813. Floors levelled with levelling compounds (at least 2 mm thick). Calcium sulfate screed (CA) according to EN 13813. New chipboards (P4-P7) or OSB 2 – OSB 4 boards, tightly screwed. Other dry and sound subfloors, such as gypsum and cementitious fibre boards. Mastic asphalt screed (AS) according to EN 13813. Can also be used on deep-cleaned metal surfaces - contact Bona technical support for application details. Bona underlays, Bona U300, Bona U310, Bona U340 & Bona U350. Concrete.

    TDS Application Notes

    Flooring must be correctly acclimatised so that it is stable with the installation environment. Depending on the species and type of flooring this can typically vary between 3 and 14 days, always follow the flooring manufacturer's guidance. A stable indoor environment must be maintained in the long term to reduce the risk of expansion and contraction and associated issues. Before using the adhesive, the indoor air temperature should be a minimum of 18 °C, floor temperature: min. 15 °C, max. 20 °C (including with underfloor heating); max. 70 % RH. The adhesive must be acclimatised to room temperature. After opening the bucket, remove the protective foil and any hardened adhesive at the edges. The adhesive should be applied evenly using a notched trowel appropriate to the flooring being laid (see guidance in the next section). The parquet should be laid into the adhesive and pressed down firmly during the open time of approx. 40 minutes. If the adhesive on the subfloor develops a skin, remove it and apply new adhesive. If any adhesive is forced through the joints onto the face of the boards, remove it carefully as it may affect the adhesion of any subsequent oil or lacquer finish. Any adhesive on prefinished surfaces should be removed with Bona Cleaning Wipes. Bona Titan can be used for directly bonding dimensionally stable parquet types on cementitious substrates (excluding cement-based levelling compounds or gypsum based materials/screeds) with residual construction moisture content exceeding the normally accepted level, without the need for an additional moisture barrier primer, provided the concrete/screed surface is free of all visible dampness. It cannot prevent other issues originating from the top, sides or ends of flooring (water leaks, puddles, hydrostatic head, etc.) nor does it eliminate other moisture or installation related issues such as improper acclimation of flooring, the effects of jobsite temperature and humidity or the lack of a functioning structural damp proof membrane within the subfloor build-up. In addition to being visibly dry, the subfloor must meet the usual requirements for parquet installation; in particular, it must be sufficiently cured (≥ 28 days), clean, sound, level and properly prepared. For heated floor constructions, the multi-stage heating protocol must have been implemented. To ensure secure and robust bonding, the adhesive must be applied with a Bona 1500 G (B16) notched trowel (application rate between 1500 and 1750 g/m², depending on the roughness of the subfloor), and the parquet must be laid into the adhesive within the open time. When applying the adhesive, ensure complete wetting of both the subfloor and the parquet. Skirting boards must be moisture-resistant or ventilated. After installation, the parquet must not be covered with vapour-tight or highly vapour-retardant materials until the subfloor is completely dry. This includes, in particular, vapour-tight films, e.g., made of PE (painter's plastic sheeting), certain mats & carpets (with dense, rubber-like backing), or TetraPak® films. You must provide the following trades and the end user with appropriate instructions. Bona Titan cures by reacting with moisture. To prevent premature curing from moisture vapour in the air, promptly replace the foil on the surface of the adhesive and the lid on the container during use..

    TDS Consumption

    8–10 mm Mosaic parquet Bona Trowel 850F or 850G (TKB B3/B6, ISO 6076 12T/11T) Usage: approximately 850 g/m² 2 layered prefinished parquet Bona Trowel 1000F or 1000G (TKB B8/B10, ISO 6076 14T/16T) Usage: approximately 1000 g/m² 22 mm strip flooring 23 mm industrial parquet 3 layered prefinished parquet Bona Trowel 1250F or Bona 1250G (TKB B11/13, ISO 6076 16T/20T) Usage: approximately 1250 g/m² Solid planks Bona Trowel 1500F or Bona 1500G (TKB B14/16, ISO 6076 22T/24T) Usage: approximately 1500 g/m² Use as a moisture barrier Bona Trowel 1500G (TKB B16, ISO 6076 24T) Usage: 1500 – 1750 g/m² (depending on surface roughness) (F = fine, G = coarse) Use a fine trowel for small pieces of wood and/or smooth subfloors, and a coarse trowel for large pieces of wood and/or rougher surfaces.

    TDS General Disclaimer

    The information in this document and all other advice and recommendations that we provide to help and assist the applicator are based on previous experience and extensive testing but make no claim to be complete. Because of the wide range of possible uses and conditions of application of our products, we do not relieve users from the need to carry out their own trials or to seek technical advice from Bona before use. Bona can only guarantee its products and not the construction as a whole. Follow recommendations from the flooring manufacturer and the provisions of relevant standards

    TDS Main USP

    PURE TITAN STRENGTH

    TDS Subfloor Preparation

    The subfloor must be even, dry, clean, free from any cracks or residues and be physically sound. The subfloor must comply with local regulations with regard to flatness and surface strength and should be slightly textured to achieve the best adhesion. Separating layers, weak surface layers, laitance and contaminants must be mechanically removed. The moisture content of the subfloor must be measured and be in accordance with local standards. All surfaces must be thoroughly vacuum cleaned prior to adhesive application. A primer is not normally required, however, to improve adhesion or to strengthen a weak top layer of the subfloor, an appropriate Bona primer should be used, refer to the relevant product technical data sheet. When there is a need to supress residual construction moisture, a moisture barrier primer such as Bona R540 or Bona R590 may be used (refer to the relevant product TDS for instructions). Alternatively, Bona Titan can be used to suppress residual construction moisture without the need for an additional moisture barrier primer, provided it is applied correctly (see details in "Application Instructions" below). If in doubt, contact Bona technical support. This product is described as a “moisture barrier” in line with common industry terminology. It functions by reducing and slowing water vapour transmission and is not designed to fully block vapour movement. It cannot be considered equivalent to a dedicated structural damp proof membrane. Note: Bona Titan is suitable for adhering relevantly approved wood flooring for use in conjunction with underfloor heating. Such subfloors must be slowly and gradually dried and warmed in accordance with the heating-up protocol. During installation and for 3 days after, the screed temperature must not exceed 25 °C. Always follow the flooring manufacturer's instructions

    TDS Sub Header

    Strongest bonding in less time!