TDS Application Notes
1. Apply Bona Floor Polish Remover solution on a small section of the floor, spread evenly using a floor mop or Bona Microfiber cleaning pad and let it dissolve the polish for approx. 5 minutes. 2. Scrub the wetted section with a hard-bristled brush or a scouring pad. 3. Wipe off the dissolved material with a floor mop from the bucket with clean water. ¹ 4. Continue working section by section until the whole floor has been treated. Replace the cleaning water frequently. 5. Large build-ups of polish may require further applications of Bona Polish Remover. 6. Once all polish has been removed, rinse the surface one more time using clean water. ¹ Alternatively use a floor cloth wrapped around the head of a Bona Microfiber floor mop to dry up the dissolved polish and remover, wring out and rinse frequently. A wet vacuum cleaner is another good option. Note: Use water sparingly on wood floors. Take care that no solution is trapped in crevices or under skirting boards. All traces of Bona Polish Remover must be removed and the floor fully dry before applying new coats of Polish or Refresher.












