TDS Application Notes
1) Shake the lacquer can and add one bottle of hardener. Immediately shake the mixture vigorously for 1 minute and then insert the enclosed filter. If mixing smaller quantities of lacquer then pour the required amount of lacquer into a separate can. 1 litre of lacquer corresponds to one part of hardener. 2) Apply Bona Pure HD using a Bona SuperCoat Roller (11 mm). Roll with a smooth flowing motion crosswise and avoiding accumulations of product. The consumption should be approx. 100-120 g/m². Allow to dry properly before applying further layers. Anticipate slightly longer drying time for each layer that is applied. 3) If the previous layer of lacquer has been allowed more than 24 hours drying time, then it is required to make an intermediate sanding with a Bona Scrad Pad. The curing process takes approximately 3 days, (90% cured in 24 hours, 100% after 72 hours) in good conditions. Do not cover the surface until the floor has fully cured. The floor may be walked on after 6 hours but remains susceptible to scuffing or marring until completely cured. Avoid wet cleaning until fully cured. To support and to speed up the drying process, suitable ventilators are recommended