For protection and revival of oiled wood floors
Bona Oil Care is a rapid drying maintenance oil for protecting and reviving oiled wood floors. Formulated to keep the solvent content to a minimum while maintaining user-friendliness and product performance. Consists of a low-viscous blend of different plant-based oils with excellent penetration ability. Replenishes the wood pores for sustained protection.
Find key technical specifications, application conditions and product information for this product. Select your preferred language to view the available translations.
Follow these recommendations to achieve the best application results for Bona Oil Care.
1. Distribute the oil thinly on a section of the floor using a Bona WoolPad or a white pad fitted under a buffing machine 2. Without delay, remove surplus material with cotton cloths and let the surface dry for minimum 12 hours. Expect longer drying time on dense, exotic wood and if the temperature is low.
~50-100 m²/litre depending on the condition of the floor
The information in this document and all other advice and recommendations that we provide to help and assist the applicator are based on previous experience and extensive testing but makes no claim to be complete. Because of the wide range of possible uses and conditions of application of our products, we do not relieve users from the need to carry out their own trials or to seek technical advice from Bona before use. Bona can only guarantee its products and not the construction as a whole. Observe recommendations from flooring manufacturer and the provisions of relevant standards.
Clean the floor regularly using a dry mop and/or a vacuum cleaner. When needed, wipe off with a damp mop with Bona Oil Soap added to the cleaning water. Always clean using as dry a method as possible. Apply Bona Oil Care frequently to ensure that the pores of the wood remain saturated and unable to pick up dirt and moisture. The frequency of this operation is determined by the level of wear and may range from every 3rd year in a domestic environment to a few times a year in a commercial environment. Detailed maintenance instructions are available at www.bona.com
WOOD FLOOR MAINTENANCE
If necessary, the previously oiled surface must be thoroughly cleaned with Bona Oil Soap or the Bona Deep Clean Solution, and allowed to dry, prior to application of oil. Allow product to reach room temperature and shake the container thoroughly before use. Minimum temperature for use is 16°C. To maintain floors treated with pigmented Bona Craft Oil 2K, a sample tin (40mls) of the relevant colour can be added to Bona Oil Care. Mix thoroughly and apply normally.
For protection and revival of oiled wood floors
BONA OIL CARE CONTAINS DRYING OILS. RISK OF SELF-IGNITION. USED CLOTHS, RAGS, WOOL PADS AND SIMILAR MATERIAL SHOULD BE PLACED IN WATER OR SEALED METAL CONTAINERS.