Bona Wood Deck Deep Cleaner

Yes. However, we recommend testing the product on a small, inconspicuous area first to ensure the desired result.

Yes, it can be used on composite decks. As composite materials can vary, we recommend a short contact time (5-10 minutes), thorough rinsing with water, and avoiding excessive use. Always test on a small, inconspicuous area first to ensure the desired result.

No, the greenish tint comes from copper-based preservatives near the surface. The cleaner removes the tint from the surface without affecting the underlying wood protection.

It can be applied using a brush, pad, or roller. Many users find it easiest to work from a tray to load the applicator evenly. It can also be applied with a low-pressure sprayer. This is a convenient and effective method, but be sure to protect nearby surfaces before spraying. Use a low-pressure sprayer with a long handle and apply close to the surface for better control. Avoid applying on windy days to prevent overspray.

Yes. This is common on very dry or weathered wood. For best results, work during cooler parts of the day, and avoid direct sunlight. Work in small sections and keep the surface wet while cleaning. If the area starts to dry, lightly rinse with water and continue scrubbing. Remove loosened dirt and debris while the surface is still wet before moving on.

Once the deck is completely dry, you can treat it with a deck soap or oil. This helps protect the wood and and enhance its appearance.

This is an acidic cleaner, which can affect how certain stains, paints, and coatings perform on the surface. These products may not dry, level, or adhere as intended. Even with thorough rinsing, we do not recommend combining the cleaner with these types of coatings due to the risk of uneven results.

Yes. As with most cleaning products, basic safety precautions should be followed. Avoid contact with eyes and skin, and wear protective gloves and eye protection during use. Keep out of reach of children. In case of eye contact, rinse thoroughly with water and seek medical advice if irritation persists. Always follow the instructions on the label before use.

Yes. For best results, apply the cleaner first and then use a cleaning machine for scrubbing. However, the cleaner can also be used directly with the Bona PowerScrubber. When using the Bona PowerScrubber, add 2 litres of Bona Wood Deck Deep Cleaner and top up the tank with 8 litres of water. Pre-rinse the area with water and scrub while distributing the solution evenly. After each use, always empty both the solution tank and the dirty water tank.

No, they are different products designed for different purposes. Bona Wood Deck Deep Cleaner is acidic and ideal for deep cleaning before applying deck soap or oil. Bona Outdoor Wood Deck Reviver is alkaline and better suited for use before applying oils, stains, or lasures, and for helping to remove previous oil or stain treatments.

Yes, this is possible. After using Bona Outdoor Wood Deck Reviver, make sure to rinse the deck thoroughly with water. Once the surface is clean and well rinsed, you can continue with Bona Wood Deck Deep Clean before treating the deck with soap or oil.