We use cookies to give you a better experience of Bona's web.Read about cookies on bona.com

Asia Pacific (EN)

Browse all styles and looks

Nordic Shimmer

Nordic Shimmer

Nordic Ash

Nordic Ash

Raw wood meets ash grey and comes out a winner. For a rustic Nordic look. Finish: natural matt.

Topcoating:
Craft Oil 2K Ash
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Waterpop the surface by applying a thin coat of water. A sponge or short-haired roller can be used for this. Restrain the amount of water yet make sure to wet all the wood. 12 h
Mix the oil with hardener and apply it to the floor using a stainless-steel trowel, squeegee or red buffing pad (approx. 30 m²/lit).
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
For a flawless finish, buff a final time using a Bona Woolpad. 8-12 h

Special considerations

Consider complementing the treatment with Bona Traffic/HD for lower maintenance frequency and to protect the pigmentation.

Other information

It is recommended to always waterpop prior to oil application to ensure colour intensity and uniformity. In high traffic areas, consider ending with two layers of Bona Traffic HD. Extra Matt is recommended to preserve the look.

Nordic Frost

Nordic Frost

A hint of white brings out the beautiful details in your wood floor. Finish: natural matt.

Topcoating:
Craft Oil 2K Frost
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Waterpop the surface by applying a thin coat of water. A sponge or short-haired roller can be used for this. Restrain the amount of water yet make sure to wet all the wood. 12 h
Mix the oil with hardener and apply it to the floor using a stainless-steel trowel, squeegee or red buffing pad (approx. 30 m²/lit).
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
For a flawless finish, buff a final time using a Bona Woolpad. 8-12 h

Special considerations

Consider complementing the treatment with Bona Traffic/HD for lower maintenance frequency and to protect the pigmentation.

Other information

It is recommended to always waterpop prior to oil application to ensure colour intensity and uniformity. In high traffic areas, consider ending with two layers of Bona Traffic HD.

Nordic Milk

Nordic Milk

White pigmented oil is massaged into the wood floor to smooth out details and enhance luster. Finish: natural matt.

Topcoating:
Craft Oil Frost
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Apply Bona Nordic Tone using an application sleeve (8-10 m2/litre). 5-10 h
Thoroughly stir the oil and apply it to the floor using a squeegee or red buffing pad (approx. 20 m²/lit).
Allow the oil 15-30 minutes to be absorbed. Buff the surface with a buffing machine equipped with a red pad, adding more oil as required. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
For a flawless finish, buff a final time using a Bona Woolpad. 12-24 h
Nordic Natural

Nordic Natural

For the look and feel of pure wood and a silky smooth barefoot experience. Finish: natural matt.

Topcoating:
Traffic Natural
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona Natural using a roller or othersuitable applicator following the direction of the wood (approx. 10-12 m²/lit). 1-2 h
Abrade to reduce grain raise using the Bona Diamond Abrasives grit 120.
Apply a second coat of Bona Natural in thesame manner. 2-3h
Protect surface with Bona Traffic Natural. 12-24 h
An additional coat of lacquer may be needed in high traffic areas.

Other information

In high traffic areas, consider ending with two layers of Bona Traffic Natural. Bona Traffic Natural has a rougher surface than traditional lacquers. For highly trafficked commercial areas, consider replacing with Bona Traffic HD Extra Matt for a similar appearance with easier clean up.

Garden Atmosphere

Garden Atmosphere

Garden Classic

Garden Classic

A classic lacquered look with a silk matt surface. Finish: silk matt.

Topcoating:
Novia
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120 or finer.
Apply Bona Classic using a roller or other suitable applicator (approx. 8-10 m²/lit). 1-2 h
Apply Bona Novia using a Bona Microfiber Roller 11 mm and let dry. 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
Apply a second coat of Bona Novia (approx. 8-10 m²/lit). 12-24 h

Other information

For higher wear resistance requirements consider replacing Novia with Mega or Traffic/Traffic HD.

Garden Intense

Garden Intense

Red brown oil produces visual qualities similar to teak, with a raw wood feeling. Finish: extra matt.

Topcoating:
Craft Oil 2K Umbra
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Waterpop the surface by applying a thin coat of water. A sponge or short-haired roller can be used for this. Restrain the amount of water yet make sure to wet all the wood. 12 h
Mix the oil with hardener and apply it to the floor using a stainless-steel trowel, squeegee or red buffing pad (approx. 30 m²/lit).
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
For a flawless finish, buff a final time using a Bona Woolpad. 8-12 h

Special considerations

Consider complementing the treatment with Bona Traffic/HD for lower maintenance frequency and to protect the pigmentation.

Other information

It is recommended to always waterpop prior to oil application to ensure colour intensity and uniformity. In high traffic areas, consider ending with two layers of Bona Traffic HD.

Garden Rich

Garden Rich

A deep dark wood finish with a matte hard wax surface combines style and protection. Finish: extra matt.

Topcoating:
Hard Wax Oil XM
Complexity:
Moderate
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Apply Bona Rich Tone using an application sleeve (8-10 m2/litre). 5-10 h
Thoroughly stir the oil and apply it to the floor using a , squeegee or red buffing pad (approx. 20 m²/lit).
Allow the oil 15-30 minutes to be absorbed. Buff the surface with a buffing machine equipped with a red pad, adding more oil as required. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
Let dry. 12 h

Other information

This look uses Extra Matt Hardwax Oil as a finish. Consider Matt or Silk matt version for a livelier impression.

Malibu Dreams

Malibu Dreams

Malibu Amber

Malibu Amber

Ideal if you're looking for a classic warm wood tone in your floor, sealed with glossy lacquer. Finish: glossy.

Topcoating:
Mega Gloss
Complexity:
Moderate
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona Amber using a roller or other suitable applicator (approx. 8-10 m²/lit). 1-2 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
Apply another coat of Bona Amber. 1-2 h
Apply Bona Mega Gloss using a Bona Microfiber Roller 11 mm and let dry (approx. 8-10 m²/lit). 2-3 h
Apply a second coat of Bona Mega Gloss. 12-24 h
Malibu Clay

Malibu Clay

An earthy look sealed with hard wax oil for style and protection. Finish: matt

Topcoating:
Hard Wax Oil Matt
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Waterpop the surface by applying a thin coat of water. A sponge or short-haired roller can be used for this. Restrain the amount of water yet make sure to wet all the wood. 12 h
Thoroughly stir the oil and apply it to the floor using a stainless-steel trowel, squeegee or white buffing pad (approx. 30 m²/lit). 15-30 min
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad. 15-30 min
Make another pass with more oil.
After another 15-30 minutes, remove surplus oil using cotton cloths. Allow to dry.
Vacuum surface and apply one coat of Bona Hard Wax Oil Matte using a Bona Microfiber Roller 5 mm (20-24 m²/lit). Allow to dry. 12-24 h

Other information

It is recommended to always waterpop prior to oil application to ensure color intensity and uniformity.

Malibu Natural

Malibu Natural

Natural oil and Bona Traffic Natural deliver a silky smooth feeling. Amazing to walk on and invisible to the eye. Finsih: natural matt.

Topcoating:
Traffic Neutral
Complexity:
Moderate
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Mix the oil with hardener and apply it to the floor using a stainless-steel trowel, squeegee or red buffing pad (approx. 30 m²/lit). 15-30 min
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad. Add more oil as required. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. Let surface dry. 8-12 h
Apply Bona Traffic Natural using a Bona Microfiber Roller 11 mm and let dry (approx. 8-10 m²/lit). 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
Apply a second coat of Bona Traffic Natural. 12-24 h
An additional coat of lacquer may be needed in high a areas.

Other information

Bona Traffic Natural has a rougher surface than traditional lacquers. For highly trafficked commercial areas, consider replacing with Bona Traffic HD Extra Matt for a similar appearance with easier clean up.

Malibu Rock

Malibu Rock

Graphite and wood, beautifully mixed in a rustic, yet elegant, look. Finish: natural matt.

Topcoating:
Craft Oil Graphite
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Waterpop the surface by applying a thin coat of water. A sponge or short-haired roller can be used for this. Restrain the amount of water yet make sure to wet all the wood. 12 h
Thoroughly stir the oil and apply it to the floor using a squeegee or red buffing pad (approx. 20 m²/lit).
After 15-30 minutes, buff the surface with a buffing machine equipped with a red pad.
After another 15-30 minutes, remove surplus oil using cotton cloths.
For a flawless finish, buff a final time using a Bona Woolpad. 12-24 h

Other information

It is recommended to always waterpop prior to oil application to ensure colour intensity and uniformity.

Touch of Grace

Touch of Grace

Grace Bright

Grace Bright

A delicate grey finish with the wooden feel preserved through brushing and painting. Finish: extra matt.

Topcoating:
Traffic HD XM
Complexity:
Moderate
Brushing:
Required
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona Classic using a roller or other suitable applicator (approx. 8-10 m²/lit). 1-2 h
Apply paint using a Bona Microfiber Roller 5 mm and let dry. 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
If required, apply a second coat of paint and let dry for complete hiding. 2-3 h
Protect surface with Bona Traffic HD XM. 6-12 h
An additional coat of lacquer may be needed in high traffic areas.

Special considerations

Brushing is required so as to preserve some of the wood feeling.

Other information

For lower wear resistance requirements, another non-yellowing lacquer such as Bona Novia or Bona Traffic can be used. In high traffic areas, consider ending with two layers of Bona Traffic HD.

Grace Dark

Grace Dark

Poise and elegance achieved through brushing and painting. Finish: silk matt

Topcoating:
Traffic HD SM
Complexity:
Moderate
Brushing:
Required
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona Classic using a roller or other suitable applicator (approx. 8-10 m²/lit). 1-2 h
Apply paint using a Bona Microfiber Roller 5 mm and let dry. 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
If required, for complete hiding, apply a second coat of paint and let dry. 2-3 h
Protect surface with Bona Traffic HD SM. 6-12 h
An additional coat of lacquer may be needed in high traffic areas.

Special considerations

Brushing is required so as to preserve some of the wood feeling.

Other information

For lower wear resistance requirements, another non-yellowing lacquer such as Bona Novia or Bona Traffic can be used. In high traffic areas, consider ending with two layers of Bona Traffic HD.

Grace Vivid

Grace Vivid

A black background combined with contrasting white for a chalky look with the wood grain visible. Finish: extra matt.

Topcoating:
Hard Wax Oil XM
Complexity:
Challenging
Brushing:
Required
Directions Drying time
Prepare the floor and end the sanding with grit 120. Vacuum carefully.
Add 5% Bona Mix Colour to a can of Bona Rich Tone (250 ml to 5 l). Shake vigorously.
Apply the mixed Tone using an application sleeve (8-10 m2/litre). 5-10 h
Thoroughly stir the oil and apply it to the floor using a, squeegee or red buffing pad (approx. 20 m²/lit).
Allow the oil 15-30 minutes to be absorbed. Buff the surface with a buffing machine equipped with a red pad, adding more oil as required. 15-30 min
After another 15-30 minutes, remove surplus oil using cotton cloths. 15-30 min
Let dry. 12 h
Vacuum and then apply 1-2 coats of Bona Hard Wax Oil XM depending on wear resistance requirements. 16-24 h

Other information

This look uses Extra Matt Hardwax Oil as a finish. Consider Matt or Silk matt version for a livelier impression.

New Modern

New Modern

Modern Liquorice

Modern Liquorice

A brushed and painted floor means the natural grain is highlighted beautifully. Finish: silk matt shine.

Topcoating:
Traffic HD SM
Complexity:
Easy
Brushing:
Required
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply a thin coat of paint (approx. 12-15 m²/lit) using a Bona Microfiber Roller 5 mm and let dry. 2-3 h
Apply a coat of Bona Traffic HD SM (approx. 8-10 m²/lit) using a Bona Microfiber Roller 11 mm and let dry. 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
Apply an additional coat of Bona Traffic HD SM. 6-12 h

Special considerations

Brushing is required so as to preserve some of the wood feeling.

Modern Pale

Modern Pale

The look and feel of bare, sanded wood enhanced with a little white pigmentation. Finish: extra matt.

Topcoating:
Traffic HD XM
Complexity:
Moderate
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona White using a roller or other suitable applicator following the direction of the wood (approx. 12 m²/lit). 1-2 h
Abrade to reduce grain raise using the Bona Diamond Abrasives grit 120.
Apply a second coat of Bona White in the same manner. 2-3 h
Protect surface with Bona Traffic HD XM. 6-12 h
An additional coat of lacquer may be needed in high traffic areas.

Special considerations

Herring bone floors can be challenging to treat with tinted lacquer. Floors that are laid in falling lengths are best suited for this application.

Other information

For lower wear resistance requirements, another non-yellowing lacquer such as Bona Novia or Bona Traffic can be used. In high traffic areas, consider ending with two layers of Bona Traffic HD. Best White effect is obtained by ending with an extramatt lacquer. Traffic Natural can also be used as an alternative.

Modern Soul

Modern Soul

A warm, intense look for your floor, sealed with a protective layer. Finish: matt.

Topcoating:
Traffic Matt
Complexity:
Easy
Brushing:
Optional
Directions Drying time
Prepare the floor and end the sanding with grit 120.
Apply Bona Intense using a roller or other suitable applicator (approx. 8-10 m²/lit). 1-2 h
Apply Bona Traffic Matt using a Bona Microfiber Roller 11 mm and let dry (approx. 8-10 m²/lit). 2-3 h
Make a light intermediate abrasion to reduce any grain raise using Bona Diamond Abrasives grit 120. Vacuum or dust wipe.
Apply a second coat of Bona Traffic Matt. 12-24 h
An additional coat of lacquer may be needed in high traffic areas.

Other information

For lower wear resistance requirements, another lacquer such as Bona Novia or Bona Mega can be used.